FORK EXTENSION SET (Includes o-rings and washers) Set of 2
These extensions screw into the original fork stanchion and extend the length by 30mm, this allows the forks to be dropped through the clamps and to raise the front end of the bike by up to 30mm. The original fork cap simply screws back in place and the whole extension integrates into the fork leg as if it was fitted from the factory.
Allen key fitting in the centre allows the extension to be tightened up into the fork leg. There is an internal hole in the extension that allows for the fork oil to be filled whilst everything is still in position.
Manufactured in the UK.
(Includes o-rings and washers) Set of 2.
Note: these can not be used with the fork pre-load adjusters